Loctite 567 glue and necessary information about the product

Loctite 567 is a sealant designed to lock and seal tapered metal threads and fittings. The product cures in a confined space without air between tightly fitting metal surfaces and prevents loosening and leakage due to shock and vibration. LOCTITE 567 provides strong curing performance. It works not only on active metals (e.g. brass, copper) but also on passive substrates such as stainless steel and plated surfaces. The high lubricating properties of this compound prevent pressure build-up on stainless steel, aluminum and all other metal pipe threads and fittings.

Loctite 567 is designed to lock and seal tapered metal threads and fittings. The product cures in a confined space without air between tightly fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The high lubricating properties of this compound prevent galling on stainless steel, aluminum and all other metal pipe threads and fittings. The product offers high temperature performance and oil resistance. It tolerates minor surface contamination from a variety of oils, such as cutting, lubricating, anti-corrosion and protective fluids.

Loctite 567 is recommended for industrial applications in the chemical processing, petroleum refining, pulp/paper/waste treatment, textile, utility/power generation, marine, automotive, industrial equipment, air compression and distribution industries. It is also recommended for industrial plant fluid power systems.

Loctite 567 adhesive specifications

Product form: White lake
Maximum thread size: 3”(7.62cm)
Heat resistant: 400ºF(204ºC
Maximum working pressure(psi)/ : 10,000 psi/

Setting time(N/mm²): 72 hours(68.9)
Substrate material to be sealed: Stainless steel, aluminum
Quick sealing in low pressure range: Yes
Product specifications: 50ml or 250ml tube

The product offers high temperature performance and oil resistance. It withstands minor surface contamination from various oils, such as cutting, lubricating, anti-corrosion and protective fluids.

Applications of Loctite 567 glue

Loctite 567 Thread Sealant with PTFE: Withstands temperatures up to 400ºF with excellent solvent resistance. Locks and seals tapered threads, including high pressure applications. Removes with hand tools. ABS approved.
Ideal for stainless steel, aluminum, galvanized metal and other inert metals.

This product is often used in the assembly and maintenance processes of professional units. In addition, it is also indicated for use in the process of energy production or energy storage, marine, automobiles, industrial equipment, etc. In addition, when using this product, you should note not to use it on plastic because the heat caused can cause cracking and damage the surface.

Instructions for use of Loctite 567 Adhesive

*** For assembly

1. For best results when using Loctite 567 Adhesive, we should clean all surfaces (outside and inside) with Loctite cleaning solvent and let them dry completely before use.

2. If the material is an inactive metal or the cure rate is too slow, use LOCTITE® SF 7471™ or LOCTITE® SF 7649™ catalyst and allow to dry.

3. Rotate the threaded part and apply an appropriate amount of glue so that the glue fills the threaded part that needs to be sealed and proceed to assemble the parts together.

4. Use hand tools to assemble the parts until proper alignment is achieved.

5. Properly tightened fittings will seal immediately to withstand low pressure ranges. For maximum pressure resistance and solvent resistance allow product to cure for a minimum of 24 hours.

*** To remove
1. Disassemble with standard hand tools.
2. Where hand tools do not work due to large length or large diameter (over 1”) apply local heat to approximately 250°C. Disassemble while hot.

*** To clean
1. Cured product can be removed with a combination of immersion in Loctite solvent and mechanical abrasion such as a brush.

Storing Loctite 567 glue

To best preserve the product, you should limit the liquid's exposure to air, and close the lid tightly immediately after use. At the same time, you should keep the Loctite 567 glue bottle in a cool place, away from direct sunlight and especially out of reach of children.

Store the product at a temperature of 2 – 8 0C. If this temperature range is exceeded, it will affect the quality of the product.

Genuine Loctite thread locking glue distributor

SAHA glue warehouse is proud to be a reputable and quality supplier of Loctite threadlocker in Vietnam. We specialize in distributing genuine threadlocker with full range of designs, ensuring durability. SAHA is committed to bringing customers genuine products at preferential prices. With a large warehouse and ready to supply, we quickly meet all needs for using Loctite glue for large and small projects nationwide. Contact SAHA to experience the best products and services!

📍 Contact Information:

SAHA ONLINE TRADING SERVICES COMPANY LIMITED

Tax code: 0110690109

Head office in Hanoi:

• Address: 54 Luong Ngoc Quyen, Van Quan Ward, Ha Dong District, Hanoi
• Hotline: 0966 753 382

Branch in Ho Chi Minh City:

• Address: 551/33 Le Van Khuong Street, Hiep Thanh Ward, District 12, Ho Chi Minh City
• Hotline: 0966 79 3669

Website: https://tongkhokeodan.com

Facebook: SAHA glue warehouse

📞Contact now to get the best quote and detailed advice!