T-SILICONE SEALANT NEUTRAL A500 PLUS
HIGH-GRADE SILICONE ADHESIVE – HIGH-GRADE NEUTRAL

PRODUCT DESCRIPTION
– High quality one-component neutral curing silicone glue
– Unaffected by temperature and extreme weather conditions.
– High recovery ability when subjected to tensile and compressive deformation during the process
Works thanks to its anti-aging, anti-shrinkage, anti-cracking and anti-change properties.
change color
– Widely used from civil works to industrial works.
high specification requirements
ADVANTAGE
– Very high adhesion and elasticity
– Very high durability up to 20 years when used outdoors
– Good elasticity
– Easy to construct
– Withstand harsh weather conditions (UV protection, anti-staining, anti-flow)
softening or thermal deformation, etc.)
– Does not flow, so it is suitable for vertical or horizontal joints.
ceiling construction
– Solvent free
– Fast curing
SCOPE OF USE
– Used as caulk during the construction and installation of all types of glass doors,
glass wall, aluminum door
– Can be used on other surfaces such as stainless steel, wood, brick, dark stone
color, PVC plastic,…
– Good for both indoor and outdoor use
STORAGE SPECIFICATIONS
Packaging: 310ml tube (24 tubes / carton)
Color: Milky white, clear white, gray, black, coffee, wood brown, clear, blue
red, blue, yellow, orange leaves
Expiry date: 12 months from date of manufacture, under original conditions.
Packaging intact. Store in a cool, dry place. Storage conditions from
+50
C to +270
C, humidity from 30%-70%.
Close the lid tightly after use to avoid drying out.

SPECIFICATIONS

Experiments were carried out under the conditions: 250C ± 20C, relative humidity RH 60% ± 5%
The above experiments were performed in the laboratory. Field results may vary.
different due to differences in construction conditions and methods
CONSTRUCTION INSTRUCTIONS
– Surface must be dry, clean, free of grease or old glue. Surface to be tested can be cleaned
fair use of common detergents.
– To increase aesthetics and reduce cleaning time, you can use masking tape to cover
Coat along the edges of joints before construction.
– Proceed with filling and plastering with T-SILICONE NEUTRAL A500 PLUS. Place T-SILICONE
NEUTRAL A500 into a dedicated glue gun. Cut the nozzle at a 45° angle at the size position
output the desired amount of glue. Pump sufficient T-SILICONE NEUTRAL A500 along the joint. Swipe
Flatten the glue surface to increase the gloss of the glue.
– Remove the protective tape immediately after construction is completed or before T-SILICONE glue
NEUTRAL A500 surface dry.
NOTE
– The construction surface temperature should be from +50
C to +500
C.
– Do not use T-SILICONE NEUTRAL A500 PLUS on surfaces that come into direct contact with food.
product
– Do not use T-SILICONE NEUTRAL A500 PLUS for structural glass.
HEALTH SAFETY INFORMATION
– Keep out of reach of children.
– Users should refer to information and recommendations on safe use, storage and disposal.
remove products belonging to the chemical group in the latest technical safety documents on physical, chemical,
toxicity, ecology and related safety parameters.

PRODUCT IMAGE

WHERE TO BUY SILICONE A500 PLUS:

SAHA ONLINE TRADING SERVICES COMPANY LIMITED

– Tax code: 0110690109

– HOTLINE: 0966.75.3382

– Phone: 0377.645.143 (Ms. Sen)

– Phone: 0396.345.468 (Mr. Chung)

– Address: 54 Luong Ngoc Quyen, Van Quan, Ha Dong, Hanoi