Silicone glue gun is a tool used to inject silicone glue accurately and evenly to beautify and bond materials in construction works, especially to create standard spray lines on every detail, including spray lines with complex shapes such as curves and cracks.

General introduction to silicone glue gun

• Product code: Apollo Silicone Glue Gun
• Color: Multicolor
• Specification: 9″ (225mm)
• Weight: 400g
• Status: IN STOCK
• Expiry date: No expiration date
• Storage: Store in a cool, dry place and avoid humid climates.

Outstanding advantages of silicone glue gun

• Silicone glue gun is a gun used to pump silicone glue,...
• Made of stainless steel, avoid oxidation after a period of use.
• Has a simpler structure than other glue guns.
• However, they consist of a gun body which is a steel frame containing the silicone tank, the tank ejector, the arm and the trigger.
• The silicone caulk gun is very easy to use, anyone can use it.
• Easy construction, effortless, labor-saving.
• The push rod is often designed with a convenient hanging hook.
• High durability, can be used many times
• Thanks to the compact design, operations are easy to perform.
• Glue gun is flexible, easy to carry and move
• No fear of breakage like other products on the market
• It only requires manual force and creates steam to push the glue out.
• The gun can be used multiple times if cleaned immediately after use.

Common applications of silicone glue guns

• For silicone glue tube
• Sealant in 250ml, 300ml, 310ml packaging

Below are specialized silicone glues for using silicone glue guns.

Instructions for using silicone glue gun properly

To help you understand how to use a silicone glue gun and tips for preserving this gun for long-term use; we will share with you the process of using a silicone glue gun below.

Step 1: Preparation

• After buying the silicone glue gun, you remove the inner box and you will receive a glue gun and a piece of steel.
• You use this piece of steel to mount on the top of the gun to create a stand when not in use.

Step 2: Load glue into gun

• Cutting the tip of the Apollo silicone sealant bottle is the first important step; and it must be cut so that the size of the glue nozzle is equal to the desired grout size.
• You should cut the nozzle into an elliptical or semicircular shape so that you can both shoot and smooth the glue; then attach the glue nozzle to the glue bottle you just cut.
• Tighten moderately, avoid tightening too much or the nozzle will break and damage the glue bottle before installing the glue bottle into the gun.

Step 3: Gun Technique

• Open the gun latch and pull the push lever back to place the silicone glue bottle inside the body of the silicone glue gun.
• Then gently squeeze the trigger until the push rod gradually moves into the glue tube base.
• Gently squeeze the trigger until the push rod contacts the pump diaphragm.
• Avoid squeezing the gun too hard or the glue will squirt out of the nozzle.

Step 4: Proceed to shoot glue

• Place the glue gun nozzle in the position where glue needs to be shot, then squeeze the trigger to shoot glue.
• Move the silicone gun evenly at an angle of about 30-45 degrees to spread the silicone evenly.
• When stopping the glue gun, you must release the trigger to stop the glue.
• Be careful not to squeeze the gun too hard. Avoid squeezing too hard causing too much glue to flow out of the nozzle.
• After a while the glue dries, check the results, clean it and then hand it over.
• Use a screw to tighten the tip of the glue tube immediately after use. To preserve the glue for future uses.

How to preserve guns after construction

To use this tool effectively and preserve it well, you need to follow a few notes below:

• Do not disassemble gun parts to avoid unnecessary damage such as disassembly and reassembly.
• Do not leave the gun upside down or place heavy objects on top of the gun.
• After finishing a shot, you must close the gun latch to prevent glue from flowing out, avoiding wasting glue and spreading glue to unwanted locations.
• After shooting glue, you should clean any remaining glue on the gun.
• During storage, avoid leaving the silicone glue gun in a humid environment to prevent it from squeaking or rusting.
• Grease the gun regularly to prevent rust and keep it running smoothly.
• When waterproofing concrete roof floors, for projects that need to be sealed

Where to buy reputable, quality silicone glue gun?

If you want to know where to buy cheap and quality silicone glue guns, come to GLUE WAREHOUSE . In addition to waterproof tape and silicone glue, we are also a wholesale and retail supplier of all kinds of glue guns nationwide.

All types of glue guns in our place are suitable for all glue products of world famous brands, with different sizes and shapes but very easy to use. The handle, gun barrel and gun body are all made of very sturdy plastic-coated steel, helping the glue line to be pumped out accurately and beautifully. With a spring-mounted rotating arm system, it is very convenient for you to adjust the amount of glue pumped out, suitable for construction on all materials with any wide or narrow area.

Choosing tongkhokeodan.com, you are guaranteed:

Genuine products with warranty

Reasonable price, high discount

Many promotions and gifts

Fast delivery within 24 hours

Free consultation or call to order directly at the hotlines below