Loctite 620 high temperature resistant anti-rotation adhesive

Loctite 620 Glue – Product introduction and how to use and preserve

Loctite 620 adhesive is designed for the bonding of cylindrical fittings, especially where low viscosity is required. The product cures when confined in the absence of air between tightly fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Loctite 620 adhesive provides strong curing performance. It works not only on active metals (such as mild steel) but also on passive substrates such as stainless steel and plated surfaces. The product provides high temperature performance and oil resistance. It tolerates minor surface contamination from various oils, as well as cutting, lubricating, anti-corrosion and protective fluids.

Loctite 620 adhesive specifications

Required power transmission capacity:
Shear strength (N/mm²): 3,800 psi
Diametrical Clearance: Up to 0.015”(0.38 mm)
Heat resistance: -54ºC to 149ºC
Setting time (can be assembled into machine/complete): 30 minutes/ 24 hours
Specification – Product code: 50ml bottle or 250ml bottle
High temperature resistant glue can withstand heat up to 450ºF(232ºC) for long periods of time
Loctite 620 glue dries in 30 minutes at room temperature, but must be heat treated for the glue to have a
can withstand high temperatures. Used to mount cylindrical parts with clearances up to
0.015”(0.35 mm). Loctite 620 can withstand shear forces up to 3,800 psi on steel after 24 hours.

Loctite 620 adhesive Approved by the US Food and Drug Administration according to ANSI 61 standard. Approved by the US Maritime Administration

Technical information

Applications of Loctite 620 glue

Loctite 620 high-strength adhesive: has the ability to transmit high loads, withstand high forces, and can withstand shear forces up to 3,800 psi . It can also fill gaps up to 0.015” (0.38 mm) in diameter, and is very suitable for environments with dynamic loads, axial forces, and radial forces. Very suitable for anti-rotation of shafts, gears, spark plugs, and other similar shaft-shaped parts, Loctite 620 adhesive is used to prevent thread stripping or to seal gaps.

With the main function of anti-rotation as above, Loctite 620 glue is often used mainly to prevent loosening of mechanical parts to ensure safety for machinery and equipment, increasing life span.

Instructions for using Loctite 620 glue

For best results, clean the surface with a cleaning solvent and allow to dry. To speed up the bonding process or if there are large gaps, use a primer.

For assembly, apply adhesive around the leading edge of the pin and inside the pin neck and use a rotating motion during installation to ensure best fit.

For compact assembly products, the adhesive must be applied to the part to create a smooth film of material. If the center is heated for assembly, attach the battery. If the battery is cooled for assembly, apply the main host. If both heating and cooling are performed, apply the material to cool the part. Avoid condensation on the cooling parts.

Notes on how to use and preserve Loctite 620 product

Loctite 620 glue can dry within 10 minutes and can shrink the glue surface within 4 minutes. Therefore, when not using the product, you need to close the lid carefully. Make sure that oxygen does not directly contact the product for a long time. Because this can reduce the main quality of the product.

When using Loctite 620 glue to lock welds, screws, and threaded parts. You should use a moderate amount. Avoid using too much, which is both wasteful and increases the bonding time of the product.

Store the product in a cool, dry place. Store the product at a temperature of 2 - 8 0C. If this temperature range is exceeded, it will affect the quality of the product.

📍 Contact Information:

SAHA ONLINE TRADING SERVICES COMPANY LIMITED

Tax code: 0110690109

Head office in Hanoi:

• Address: 54 Luong Ngoc Quyen, Van Quan Ward, Ha Dong District, Hanoi
• Hotline: 0966 753 382

Branch in Ho Chi Minh City:

• Address: 551/33 Le Van Khuong Street, Hiep Thanh Ward, District 12, Ho Chi Minh City
• Hotline: 0966 753 382

Website: https://tongkhokeodan.com

Facebook: SAHA glue warehouse

📞Contact now to get the best quote and detailed advice!

https://tongkhokeodan.com/wp-admin/