Loctite 545 Thread Sealant
Loctite 545 Thread Sealant
House for sale
Out of stock
Couldn't load pickup availability
Get $20 off when you spend $1,000 or more! Learn more
Thông số sản phẩm
Thông số sản phẩm
Chi tiết sản phẩm
Chi tiết sản phẩm
Loctite 545 Adhesive – Product Introduction and Their Uses
Loctite 545 is a high viscosity sealant used to seal and seal gaps in steel pipes. The product has a special high viscosity that makes it easy to install and remove. Used to seal gaps in hydraulic and pneumatic pipes. Contains no fillers or particles that can contaminate water systems, valves, or clog filters. Suitable for fittings up to 2 inches (50mm) in diameter including hydraulic and pneumatic pipes. Good solvent resistance.
Loctite 545 glue is a product manufactured to serve the gluing and reconnecting of metal heads as well as accessories in metal pipes. Thanks to its strong adhesive ability, this product can help the metal heads fit together without fear of loosening or leaking during later use. That is why the product is specialized in sealing gaps in hydraulic and pneumatic pipes. Not to mention the good solvent resistance of the product further affirms its quality compared to many other product lines.
This product is certified by the Canadian Food Inspection Agency (CFIA), so when using it, users can be completely assured of the quality they receive. Not only does it ensure safe use, but it is also quite safe for health during use.
Note when storing, keep in the original box and keep in dry places. Information about product storage is clearly stated on each product. Note that the product may be damaged during use, so do not leave the product in unsanitary places because it may damage and change the properties of this product.

Locttie 545 glue specifications
Description: Purple solution
Maximum thread size: Up to 2” (5.08cm)
Heat resistant: 300ºF (150ºC)
Maximum working pressure(psi)/Setting time(N/mm²): 10,000 psi/ 24 hours(68.9)
Base material to be sealed: metal
Fast sealing at low pressure range: No
Instructions for using Loctite 545 glue
For best results, clean surfaces (inside and outside) with cleaning solvent and allow to dry. To speed up the bonding process or have large gaps, use primer and allow to dry.
For assembly, apply adhesive around the leading edge of the pin and inside the pin neck and use a rotating motion during installation to ensure best fit.
For press-fit assembly, apply glue thoroughly to the reverse side and assemble at high compression level.
For compact assembly products, the adhesive must be applied to the part to create a smooth film of material. If the center is heated for assembly, attach the battery. If the battery is cooled for assembly, apply the main host. If both heating and cooling are performed, apply the material to cool the part. Avoid condensation on the cooling parts.
Notes on product use and storage
Loctite 545 glue can dry within 10 minutes and can shrink the glue surface within 4 minutes. Therefore, when not using the product, you need to close the lid tightly. Make sure that oxygen does not directly contact the product for a long time. Because this can reduce the main quality of the product.
When using loctite 545 glue to lock welds, screws, and threaded parts. You should use a moderate amount. Avoid using too much, which is both wasteful and increases the bonding time of the product.
Store product in a cool, dry place.
Genuine Loctite thread locking glue distributor
SAHA glue warehouse is proud to be a reputable and quality supplier of Loctite threadlocker in Vietnam. We specialize in distributing genuine threadlocker with full range of designs, ensuring durability. SAHA is committed to bringing customers genuine products at preferential prices. With a large warehouse and ready to supply, we quickly meet all needs for using Loctite glue for large and small projects nationwide. Contact SAHA to experience the best products and services!
📍 Contact Information:
SAHA ONLINE TRADING SERVICES COMPANY LIMITED
Tax code: 0110690109
Head office in Hanoi:
- Address: 54 Luong Ngoc Quyen, Van Quan Ward, Ha Dong District, Hanoi
- Hotline: 0966 753 382
Branch in Ho Chi Minh City:
- Address: 551/33 Le Van Khuong Street, Hiep Thanh Ward, District 12, Ho Chi Minh City
- Hotline: 0966 79 3669
Website: https://tongkhokeodan.com
Facebook: SAHA glue warehouse
📞Contact now to get the best quote and detailed advice!
Materials & Care
Materials & Care
Made from soft, breathable, and sustainable fabrics, our clothing is built for comfort and everyday durability. To keep items looking their best, machine wash cold with like colors and tumble dry low. Avoid bleach or harsh detergents to preserve fabric quality and color over time.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.