About Loctite 569 Adhesive

Loctite 569 glue is a brown solution, used to seal plastic pipe threads with metal. Avoid loosening and leakage when subjected to mechanical impacts, fast drying time, high strength resistance, large adhesive force. This is a type of glue specifically used to seal the threaded part, thanks to which the water pipe is easily sealed without any obstacles. Thanks to the firmness of this glue, we can attach the parts of the pipe together without fear of loosening or leakage during use. The product is certified safe by ABS and also received Australian food safety certification recognizing the level of effectiveness that not all materials have achieved before.

Loctite 569 adhesive technical specifications description

Loctite 569 is a brown liquid.
Temperature resistance: -65ºF to 300ºF (150ºC)
Maximum working pressure(psi)/Setting time(N/mm²): 10,000 psi/ 24 hours(68.9)
Base material to be sealed: metal
Fast sealing at low pressure range: No
Product specifications: 50ml bottle or 250ml bottle
Thread sealing – Recommended for fine threaded connections such as pneumatic systems and
hydraulics and other small hoses in general.ABS approved.ABS approved.
Approved by the Canadian Food Inspection Agency (CFIA)

Instructions for using Loctite 569 glue

To get the most out of Loctite 569 glue, you need to refer to the correct way to use the glue as follows. First, before pouring the glue, you need to clean the surface from dirt with a specialized cleaning solvent. If your material is passive metal that is pre-bonded with glue or absorbs glue slowly, you can use Loctite activator sprayed on the metal surface.

After the basic cleaning step, it will be time to apply glue. Apply Loctite 569 glue around the bolt threads or the materials you need to bond and connect. Note that you should use the appropriate amount of glue for your needs and follow the manufacturer's requirements so that the glue can work best.

Instructions for removing Loctite 569 glue properly

First, you should use hand tools to remove the glue properly. In case your hand tools cannot reach the location that needs to be removed. Then you should use a heat bottle to heat the location that needs to be removed at an average temperature of 250 degrees Celsius.

After removing the glue, you should clean up the excess glue by using a specialized solvent for mechanical cleaning. These are the basic steps for removing glue that you need to refer to and learn before using Loctite 569 glue.

How to preserve Loctite 569 glue

After use, you should close the glue cap carefully so that the glue does not solidify when exposed to air for too long. Next, you should keep Loctite 569 glue in a cool, dry place and avoid exposure to sunlight. This will ensure the quality of the glue in the safest way.

If you have any questions about Loctite 569 glue, please contact us immediately. Here, there is always a team of professional and enthusiastic staff who will advise anytime, anywhere. Especially if you order in large quantities, we always offer competitive prices and best suit the needs of customers.