What is LOCTITE glue, history of the LOCTITE brand

LOCTITE is an American brand of adhesives, sealants and surface treatments, including acrylic, anaerobic, cyanoacrylate, epoxy, hot melt, silicone, urethane and UV/light cure technologies. Loctite products are sold globally and used in a variety of industrial applications.

In 1953, American professor Vernon K. Krieble developed an anaerobic thread sealant in his basement laboratory at Trinity College in Hartford, Connecticut. Krieble's company, American Sealants, created the Loctite brand, which was promoted as ushering in a new era of mechanical reliability by eliminating vibrational loosening of mechanical fasteners, a frequent cause of machine failure. In 1956, the name Loctite was chosen by Krieble's daughter-in-law, Nancy Brayton Krieble. The LOCTITE brand was officially launched to the public at a press conference at the University Club of New York on July 26 of that year.

After 44 years of development with many great achievements, in 1997, Loctite was acquired by Henkel, a German Fortune 500 company as a leading brand. Since then, Loctite has remained a key brand of Henkel and is a supplier of household adhesives, epoxies, spray adhesives, construction and home repair adhesives, sealants and fillers. In recent years, the company has increased its focus on green and sustainable technologies.

About Loctite 569 Adhesive

Loctite 569 glue is a brown solution, used to seal plastic pipe threads with metal. Avoid loosening and leakage when subjected to mechanical impacts, fast drying time, high strength resistance, large adhesive force. This is a type of glue specifically used to seal the threaded part, thanks to which the water pipe is easily sealed without any obstacles. Thanks to the firmness of this glue, we can attach the parts of the pipe together without fear of loosening or leakage during use. The product is certified safe by ABS and also received Australian food safety certification recognizing the level of effectiveness that not all materials have achieved before.

Loctite 569 adhesive technical specifications description

Loctite 569 is a brown liquid.
Temperature resistance: -65ºF to 300ºF (150ºC)
Maximum working pressure(psi)/Setting time(N/mm²): 10,000 psi/ 24 hours(68.9)
Base material to be sealed: metal
Fast sealing at low pressure range: No
Product specifications: 50ml bottle or 250ml bottle
Thread Sealing – Recommended for fine threaded connections such as pneumatic systems and
hydraulics and other small hoses in general.ABS approved.ABS approved.
Approved by the Canadian Food Inspection Agency (CFIA)

Link to Loctite 569 glue technical document:

https://tdsna.henkel.com/NA/UT/HNAUTTDS.nsf/web/F976BF4A663ECFEF882571870000D81C/$File/569-EN.pdf

Instructions for using Loctite 569 glue

To get the most out of Loctite 569 glue, you need to refer to the correct way to use the glue as follows. First, before pouring the glue, you need to clean the surface from dirt with a specialized cleaning solvent. If your material is passive metal that is pre-bonded with glue or absorbs glue slowly, you can use Loctite activator sprayed on the metal surface.

After the basic cleaning step, it will be time to apply glue. Apply Loctite 569 glue around the bolt threads or the materials you need to bond and connect. Note that you should use the appropriate amount of glue for your needs and follow the manufacturer's requirements so that the glue can work best.

Instructions for removing Loctite 569 glue properly

First, you should use hand tools to remove the glue properly. In case your hand tools cannot reach the location that needs to be removed. Then you should use a heat bottle to heat the location that needs to be removed at an average temperature of 250 degrees Celsius.

After removing the glue, you should clean up the excess glue by using a specialized solvent for mechanical cleaning. These are the basic steps for removing glue that you need to refer to and learn before using Loctite 569 glue.

How to preserve Loctite 569 glue

After use, you should close the glue cap carefully so that the glue does not solidify when exposed to air for too long. Next, you should keep Loctite 569 glue in a cool, dry place and avoid exposure to sunlight. This will ensure the quality of the glue in the safest way.

If you have any questions about Loctite 569 glue, please contact us immediately. Here, there is always a team of professional and enthusiastic staff who will advise anytime, anywhere. Especially if you order in large quantities, we always offer competitive prices and best suit the needs of customers.

Where to buy Locite 569 glue?

In the current market, there are many establishments selling Loctite 569 instant adhesive. However, not all establishments bring a quality product to customers. Therefore, customers need to carefully consult the information before making a decision.

Loctite VN – the only authorized distributor of the Loctite brand in Vietnam is a perfect choice. Products with clear origin, transparent prices and good service quality will make customers extremely satisfied. When purchasing at Loctite VN, customers also receive dedicated advice from the staff.

North : Helios Tower, 75 Tam Trinh, Hoang Mai, Hanoi.

Central Region: 248 Au Co, Lien Chieu, Da Nang

South: 228 Binh Long, Phu Thanh Ward, Tan Phu District, Ho Chi Minh City. Hotline: 0913 656 305