Describe

– High quality one-component neutral curing silicone glue
– Unaffected by temperature and extreme weather conditions.
– High recovery ability when being deformed by tensile and compressive forces during working process thanks to its anti-aging, anti-shrinkage, anti-cracking and non- color changing properties .
– Widely used from civil works to works requiring high technical characteristics.

Advantage

– Very high adhesion and elasticity
– Very high durability up to 20 years when used outdoors
– Good elasticity
– Easy to construct
– Withstand harsh weather conditions (UV protection, anti-staining, anti-flow)
softening or thermal deformation, etc.)
– Does not flow, so it is suitable for vertical or horizontal joints.
ceiling construction
– Solvent free
– Fast curing

Scope of use

– Used as caulk during the construction and installation of all types of glass doors,
glass wall, aluminum door
– Can be used on other surfaces such as stainless steel, wood, brick, dark stone
color, PVC plastic,…
– Good for both indoor and outdoor use

STORAGE SPECIFICATIONS

Packaging: 310ml tube (24 tubes / carton)
Color: Milky white, clear white, gray, black, coffee, wood brown, clear, blue
red, blue, yellow, orange leaves
Expiry date: 12 months from date of manufacture, under original conditions.
Packaging intact. Store in a cool, dry place. Storage conditions from
+50
C to +270
C, humidity from 30%-70%.
Close the lid tightly after use to avoid drying out.

Specifications

Experiments were carried out under the conditions: 250C ± 20C, relative humidity RH 60% ± 5%
The above experiments were performed in the laboratory. Field results may vary.
different due to differences in construction conditions and methods

Construction instructions

– Surface must be dry, clean, free of grease or old glue. Surface to be tested can be cleaned
fair use of common detergents.
– To increase aesthetics and reduce cleaning time, you can use masking tape to cover
Coat along the edges of joints before construction.
– Proceed with filling and plastering with T-SILICONE NEUTRAL A500 PLUS. Place T-SILICONE
NEUTRAL A500 into a dedicated glue gun. Cut the nozzle at a 45° angle at the size position
output the desired amount of glue. Pump sufficient T-SILICONE NEUTRAL A500 along the joint. Swipe
Flatten the glue surface to increase the gloss of the glue.
– Remove the protective tape immediately after construction is completed or before T-SILICONE glue
NEUTRAL A500 surface dry.
NOTE
– The construction surface temperature should be from +50
C to +500
C.
– Do not use T-SILICONE NEUTRAL A500 PLUS on surfaces that come into direct contact with food.
product
– Do not use T-SILICONE NEUTRAL A500 PLUS for structural glass.

T-SILICONE ADHESIVE COLOR CHART A500 PLUS

PRODUCT IMAGE

WHERE TO BUY SILICONE A500 PLUS:

SAHA ONLINE TRADING SERVICES COMPANY LIMITED

– Tax code: 0110690109

– HOTLINE: 0966.75.3382

– Phone: 0377.645.143 (Ms. Sen)

– Phone: 0396.345.468 (Mr. Chung)

– Address: 54 Luong Ngoc Quyen, Van Quan, Ha Dong, Hanoi