Size:

Upper Outer Diameter: Approx. 6.5cm/2.56in

Lower Outer Diameter: Approx. 4.2cm/1.65in

Height: Approx. 5cm/1.97in

Features:

Comes in three parts: one inside part, one outside part and valve cap.

Will fit most inflatable boats, river rafts and kayaks.

Easy to inflate and to deflate.

Double seal leak protection. Excellent air leakage performance.

Great accessory for boating enthusiasts.

How to use:

Method 1: Inflate the air when the spring in the middle of the valve does not pop out (only inhale but not out)

Advantages: After the air is full, pull out the inflation tube, the air nozzle shrapnel will automatically close, and there will be no air leakage

Disadvantages: slow inflation speed, long time, abnormal noise may occur due to gas pushing the shrapnel

Method 2: Rotate the operating lever in the middle of the gas nozzle, and the other shrapnel is fully opened (inlet and out)

Advantages: fast inflation speed, short time, no abnormal noise

Disadvantages: After being fully charged, when the inflation tube is pulled out, a part of the air will leak because the air nozzle is in a fully opened state, until the operating lever in the middle of the manually rotating air nozzle is closed

Either way, after the air is full, the air nozzle cap and air nozzle must be screwed tightly to prevent air leakage

Note:

1.After inflating, you should tighten the valve and valve cap, in case of air leakage.

2.Before purchase, please confirm that the original inflation valve is consistent with the appearance and size of our products, and can only be used if the appearance and size are consistent.